Question 1

How much does it cost to add lattice to existing fence?

Accepted Answer

Adding lattice toppers to existing fences costs $8-$18 per linear foot including materials and installation, providing 1-2 feet of additional height and partial privacy screening. Lattice additions may require permits if total fence height exceeds local maximums of 6-8 feet. This economical upgrade adds visual interest and privacy without complete fence replacement costing 70-85% less than new taller fencing while achieving similar functional results.

Question 2

What is a fence material delivery?

Accepted Answer

Fence material delivery by suppliers typically costs $75-$200 depending on load size and distance, with free delivery often available for orders exceeding $1,000-$2,000. Delivery includes offloading materials at accessible locations though placement fees apply for precise positioning or difficult access. Schedule deliveries 1-2 days before installation ensuring materials are on-site when crews arrive but minimizing theft risk and weather exposure that could damage unprotected lumber.

Question 3

Can fence posts be set in existing concrete?

Accepted Answer

Fence posts can be set in existing concrete holes if the holes are 8-10 inches diameter and 24-36 inches deep, though this method provides 20-30% less stability than fresh concrete. Existing concrete may have cracks that allow movement, and improper hole size can prevent adequate concrete coverage around new posts. Removing old concrete and setting new posts properly ensures the fence lasts its full 15-30 year lifespan.

Question 4

How much does fence removal cost?

Accepted Answer

Fence removal costs $3 to $6 per linear foot or $450-$1,200 for a typical 150-200 foot fence including demolition, concrete footing removal, and disposal. Chain link removal costs less ($2-$4 per foot) while concrete or masonry fences cost more ($8-$15 per foot). Many contractors offer discounted or free removal when installing a new fence, saving $400-$800 on total project costs.

Question 5

Can tree roots damage fence posts?

Accepted Answer

Tree roots can damage fence posts by lifting them out of the ground, cracking concrete footings, or accelerating wood rot through moisture and contact. Install fence posts at least 6-10 feet from large trees to avoid root interference, or use root barriers and concrete footings 36-48 inches deep in unavoidable situations. Roots from trees like willows, poplars, and maples extend 1.5-3 times the canopy width, requiring wider buffer zones.

Fence Installation in New York, NY

No Fence Installation Pros Listed Yet

About Fence Installation in New York, NY

Fence Installation FAQs in New York, NY

How much does it cost to add lattice to existing fence in New York, NY?

What is a fence material delivery in New York, NY?

Can fence posts be set in existing concrete in New York, NY?

How much does fence removal cost in New York, NY?

Can tree roots damage fence posts in New York, NY?